Hose Pump is non-seal type positive displacement pump. Two sliding shoes rotate around special reinforced hose, vacuum suction occurs by restoring force of squashed special reinforced hose, suck down the fluid, discharges by shifting of sliding shoes.
Special grease (Bredel Oil) is inside the casing and cools down the frictional
heat generated between sliding shoes and hosewall. As a result, long life
of horse is acheived. |
 Features 
| 1. |
Best suitable for high concentration slurry, abrasive slurry and fluid in wchich shearing is not accepted |
| 2. |
High discharge pressure (Max: 1.47Mpa (15kg/cm2)) |
| 3. |
High self-priming ability/Able to extract pull off the vacuum vessel |
| 4. |
Idling does not matter because of its non-seal structure |
| 5. |
Handling liquid goes through smoothly because of no dead space. |
| 6. |
Easy to clean inside pump horse |
| 7. |
Strong pump horse (high withstanding pressure, abrasion resistance, long life) |
| 8. |
Wide range of pump size (Max: 60m3/Hr) |
|
|
SPX-10, SPX-15, SPX-20, SPX-25, SPX-32, SPX-40, SPX-50, SPX-65, SPX-80,
SPX-100 |
|
Horse material: NR, NBR, NBRX, EPDM |
Applications
| 1. |
Slurry, solid compound liquid (mineral ore, metal, ferrite, ceramic raw material, carbon black, abrasive compound, flocculating agent, wastewater sludge, filter aid, dredging sludge, calcium hydroxide, etc) |
| 2. |
Chemicals, High viscosity materials (silicone, latex, coating compound, adhesive, plaster, dehydrated cake, print ink, coal tar, soybean paste, milk product, syrup, liquid egg, petroleum and petroleum product, cement-mortar, freshly-mixed concrete, aerated concrete, GRC raw material etc) |
Inquiry
|
|
